Motocaddy S1

I have a new Motocaddy s1 with a litium battery.

It works fine on flat paths. All speeds 1 to 9.

However, it struggles in medium rough and up hill. It will stop completely. If I lift the wheels they turn well but on the ground the spindles turn but seem to spin in the wheels rather than drive the wheels. Have I assembled something wrongly or is there a problem with the wheels or spindles?

Hi John,

There is a left and right wheel. If you put them on the wrong side you will get exactly what you mention. The wheels have an 'L' and 'R' on them and are fitted viewed as if you were stood behind the trolley holding the handles

No problem John. I take mine off after each round and still sometimes put them on the wrong side or fail to engage the splines fully. I know the tell-tale signs now!